Busy Signal in the first incoming (Cisco 7940) xialele2010-06-06 21:23:06

Hi,

I set up a home voip phone system. I use ipkall and forward to voipdiscount and ring my cisco 7940. The problem is that the first incoming call will get busy signal. If the following incoming call is place within short of time, then the incoming call can ring the cisco 7940 phone. If there is no incoming call for a long time ( a few minutes), then the first incoming call will get busy signal again. Here is the link that I followed to setup my system.

http://afxa9.comxa.com/

Thanks!

回复：Busy Signal in the first incoming (Cisco 7940)

设置 timer_register_expires

回复：设置 timer_register_expires

回复：回复：设置 timer_register_expires

回复：回复：回复：设置 timer_register_expires

yes, it's for ip phone. After save the setup, no reset needed