Horse662012-09-01 17:55:54

计算机是Dell的台式机,操作系统是Win7.换装HD后每次启动都会看到这样的message "Drive 1 not found: serial ATA, SATA-2. Strike the F1 key to continue, F2 to run the setup utility".

按F1后一切正常只是每次启动都要按F1很烦!
按F2到setup里没能搞定。请教各位指点一下。谢谢!

coolwin2012-09-01 18:37:01
you connect the new HD to port 2, it was connected to port 1.
Horse662012-09-01 19:19:49
回复:you connect the new HD to port 2, it was connected to port 1.