Car back to life 老生长谈2018-12-02 00:20:54

the day before yesterday i had this http://bbs.wenxuecity.com/auto/484345.html.

today i decided to tackle it.

dropped the skid, quickly noticed the wires having been chewed.  pulled the loom and took this pic

 

 

took the terminal out.  the green wire was a trouble - not possible to solder.  pryed out the top end:

 

solder an extension:

 

went under the belly, and soldered the wires to where each belongs.  heat shrank all connections.  plugged the terminal to the socket

test - turned engine on, no error message. drove around, no issues.

now, i need to go home depot to get something to repel those creatures at least for tonight and next few days until i get jt eaton 709.  

a happy ending... thank you all!

 

 

 

 

good.

lessons learnt :-)

在车下电焊，比较费力吧。我在桌面上都焊接不好。

是不容易。耐心起了作用 ：)

很简单我所有的wire都是solder

Yep, I like soldering better than crimping, even on solar connec

胶带可能过段时间就松了，可以试试热缩管

我都用的缩管（heat shrink), 最后把3条线用胶带并到一起防止互相磨擦。最后的胶带头是用了超级胶防止松开：）