我是一新手，前两天按照别人教的方法给我的电脑添加了一块硬盘，与原来的硬盘挂在同一条硬盘线上，经跳线作为从盘，原来所装的系统为XP，刚装上是系统能发现新硬盘，也能正常运行。但王新硬盘上存储文件时系统却报错，然后关机，将新硬盘去掉，再开机，再关机，把新硬盘再加上，运行又正常，再往新硬盘存储文件，又报错。其错误显示为：
A problem has been detected and windows has been shut down to prevent damage to your computer.
KERNEL_STACK_INPAGE_ERROR
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadwing. If you need to use sage Mode to remove or disable components, restart your computer, press F8 to select Advanced startup options, and then select safe Mode.
Technical information:
*** STOP: 0x00000077 (0x000000E, 0XC000000E, 0X00000000, 0X00FCC000)
Beginning dump of physical memory
那位老大帮忙解决一下，谢谢了！！！
--文学城www.wenxuecity.com--